QRAnalytica

How Do I Run a QR Code Scavenger Hunt?

To run a QR code scavenger hunt, put a code at each stop that opens a clue or a short form, chain the stops, test the route, and keep a backup link.

Nookesh Karri · 10 min read
Dark cover card with the title 'How Do I Run a QR Code Scavenger Hunt?' in white and a lime accent bar

A QR code scavenger hunt works like this: you place a QR code at each stop, each code opens a clue or a short question, and answering it tells players where to go next. Plan the route, make one code per stop, test every code where it hangs, and print a short link under each one in case a scan fails.

Making the codes takes minutes. The hard parts are stopping teams from skipping stops and knowing where they get stuck.

How a QR code scavenger hunt works

A QR code scavenger hunt is a chain of stops where the code at each stop opens the clue for the next one. The code itself holds only a link. All the game logic lives in what that link opens: a page, a video, an audio clip or a form.

There are two common designs:

  • Open hunt: every code shows a clue or a question. Teams can find stops in any order and write answers on a sheet. One classroom tool works this way: students scan codes around school to get quiz questions and score points for each one answered correctly.
  • Chained hunt: each stop asks a question, and only a correct answer reveals the next location. Teams must go in order, which is fairer for a race.

A 2014 classroom report described a game built from QR codes, Google Forms and Spreadsheets that had students review course material while learning their way around a new campus building.

What you need before you start

A QR scavenger hunt needs very little kit, and most of it is free.

  • A route: a list of stops, each a real place or object (a shelf, a statue, a meeting room door).
  • Clues: one per stop. Text, a photo, a video, an audio clip or a short form all work.
  • A QR code generator: free static codes are fine for one hunt. Dynamic codes cost money but can be edited later.
  • Phones: at least one per team, with the camera app able to scan.
  • Printed codes: on card or stickers, with a short link printed under each.
  • A backup plan: spare codes, tape, and the full answer list in your pocket.

How to set up a QR code scavenger hunt step by step

Setting up a QR code scavenger hunt takes six steps: route, clues, links, codes, test, run. Do them in this order, because each one depends on the last.

  1. Walk the space and pick your stops. Choose spots with phone signal, good light and no glare. Note what is at each spot, since clues should point at something real.
  2. Write the clues backwards. Start from the final stop and write each clue so it describes the next place. That way, the chain never points at a stop you dropped.
  3. Turn each clue into a link. A clue can be a shared document, a hosted image, a video, an audio file or a form. Audio clues are useful for younger players and for English-language learners.
  4. Make one QR code per stop. Name each code after its stop (“Stop 3 - Library desk”), so you can tell them apart when you print and when you check results. If you’re using forms, our guide to making a QR code for a Google Form covers the link to copy.
  5. Print and place the codes. Leave white space around each one and put the short link under it.
  6. Test the route on the day. Scan every code in place with two different phones, then fix what fails.

How to check answers so teams can’t skip stops

The free way to check answers is one short Google Form per stop, with the answer locked behind a validation rule and the next location hidden in the confirmation message. Players can’t see the next clue until they answer the current one correctly.

Here’s how each stop’s form is built:

  1. Add one short-answer question with the clue or riddle.
  2. Open More > Response validation on that question. Google Forms lets you set rules people must follow before they can submit. For short answers, the rule types are Number, Text, Length and Regular expression.
  3. Add custom error text such as “Not quite. Look at the plaque again.” Players see it when their answer doesn’t match.
  4. Write the next location into the form’s confirmation message. After a submission, the message on screen can give instructions for the next part of the hunt.
  5. Add a “Team name” question, so the response sheet shows which team finished each stop and when.

Say stop 3 is the reference desk in a school library. The code by the desk opens a form asking, “What year is printed on the oldest atlas on this shelf?” A Number rule accepts only the right year. The confirmation message then says, “Go to the place where you’d return a book after hours.” Stop 4’s code waits at the book drop.

Use a regular expression when answers can be spelled several ways. A rule like (?i)^\s*(the )?book ?drop\s*$ accepts “Book drop” and “the bookdrop” without punishing capital letters.

Static or dynamic QR codes for a scavenger hunt?

Static codes work for a single hunt you test carefully. Dynamic codes are worth paying for when you’ll reuse the codes or can’t risk a broken link on the day. A static code always takes you to one place, while a dynamic one sits behind a login and lets you change where it points.

QuestionStatic codeDynamic code
CostFreePaid plan
Fix a typo in a link after printingReprint the codeEdit the link
Reuse the printed codes next termOnly with the same cluesPoint them at new clues
See when each stop was scannedNoYes
Works if the code service shuts downYesNo

For a hunt you rerun every year, you laminate the cards once, then change where each code points when you write new clues.

Printing and placing the codes

Most hunt codes that fail are printed too small, cropped or placed under glare. The QR standard calls for a white margin, called the quiet zone, four modules wide on every side of the code. Don’t trim it when you cut cards.

  • Size for the distance. Players will scan from arm’s length, so a code on a wall needs to be bigger than one on a desk. Our QR code print size guide has the numbers.
  • Avoid shiny surfaces. Laminated cards near windows reflect light and stop scans. Matte card is safer.
  • Check signal at each spot. Basements and stairwells often have none, and every clue here is online.
  • Mount codes at eye level for the youngest or shortest player, and keep one stop reachable from a wheelchair.

What goes wrong on the day

The common failures are a code that won’t scan, a missing card and a dead link. Plan for each one before players arrive.

  • Code won’t scan. Players type the short link printed under it. Our troubleshooting guide explains how to tell a phone problem from a code problem.
  • Missing card. Carry spares, and photograph every stop as you place it.
  • Broken link. A static code means a reprint. With a dynamic code, you fix the destination from your phone and the printed card keeps working.
  • Stuck team. Give each team a hint card or a number to text. One stuck team holds up the prize-giving for everyone.

Seeing where teams get stuck

Dynamic codes record a scan count for each stop. If each stop has its own code, you can see how far teams have got without walking the route. In QRAnalytica, every code gets hourly scan counts. If stop 4 shows scans and stop 5 shows none an hour later, the clue for stop 5 is too hard or the card is gone.

After the hunt, the gaps between scan times show which clues took longest, so you know what to rewrite next time. Reading scan times explains the hourly chart.

The limitation: QRAnalytica counts scans anonymously, without cookies or personal data. It shows that a stop was scanned, not which team scanned it. Team progress comes from the form responses. Dynamic codes also depend on QRAnalytica’s redirect servers staying up during your event. The Starter plan is $15/month for 20 codes, and the 7-day free trial is enough for a single event if you’d rather test it first. A dynamic QR code per stop is all you need.

My take

I’d build almost every hunt as a chained hunt with one form per stop. It costs nothing, it stops skipping, and the response sheet doubles as your scoreboard. The open design wins only for very young players, who struggle to type answers.

Print the short link under every code, every time. It turns a failed scan from a crisis into a few seconds of typing. For large events with photo challenges and live leaderboards, pay for a hunt app.

FAQ

Do players need an app for a QR code scavenger hunt?

No. Most phone cameras open QR codes on their own, and the clues can be web pages or free forms. You only need a dedicated hunt app if you want live leaderboards, photo checks or offline play.

How do I stop teams from skipping stops?

Hide the next location behind the answer to the current stop. Put a short form at each stop, check the answer with a validation rule, and show the next clue only in the message that appears after a correct submission.

Should I use static or dynamic QR codes for a scavenger hunt?

Static codes are fine for a one-off hunt you test well. Dynamic codes cost money but let you fix a broken link or swap a clue after printing, and they show when each stop was scanned.

What do I do if a code won’t scan during the hunt?

Print a short link under every code so players can type it, and carry a few spare printed codes. Most failures come from glare, a code that’s too small, or a cropped white border.

How many stops should a QR scavenger hunt have?

Enough to fill your time slot with some slack. Walk the route yourself, time it, and add a few minutes per stop for scanning and discussion before you decide.

Sources

Track your dynamic campaigns. 7-day trial, no credit card.
Generate Dynamic QR